GENI CORPORATION - Jordan

Application:
The machine is designed for mineral water, non-granule juice etc.

Features:
1. Machine contruction covered by stainless steel #304.
2. Fast change-over design for different size of bottle.
3. Stainless steel centrifugal pump : 1 set
4. Mitsubishi PLC control system (Japan made)
5. Digital LCD touch screen display and setting.
6. No bottle no filling safety device.
7. Filling volume range : 250 ~ 3000 ml.
8. Dipping type filling nozzle, no spilling of liquid onto clean bottles and conveyor.
9. Filling nozzle holding device and uplift assembley with a huge solenoid valve.
10. One air compressor with dryer is required to be prepared by user.
11. Photocell sensors.
12. Made in Taiwan.

Options:
1. Liquid feeding pump with a stand.
2. Product feeding turn table ( diameter 650 / 800 / 1000 mm).
3. Safety cover with interlock system.

Application:
Gear pumps designed for handle small volume filling from water - thin to viscid products in food, chemical, cosmetic, medical area.

Features:
1. Machine construction covered by stainless steel SUS#304.
2. Liqid contact parts of Gear Pump in stainless steel SUS#316.
3. Fast change-over design for different size of bottle.
4. Mitsubishi PLC control syster.
5. Digital LCD touch screen display and setting.
6. No bottle - no filling safety device.
7. Volumetric filling system by gear pumps driven by AC motors with inverters.
8. Filling volume range : 10 ~ 400 ml.
9. Dipping type filling nozzle, no spilling of liquid onto clean bottles and conveyor.
10. Filling nozzle holding device and uplift assembly with a huge solenoid valve.
11. One air compressor with dryer is required to be prepared by user.
12. Photocell sensors.
13. Made in Taiwan.

Application:
This machine is designed to handle water-thin to very viscid fluids.

Features:
1. Machine construciton covered by stainless steel SUS#304
2. Filling pump driven by variable speed AC motor with inverter.
3. Pneumatic ball valve, special design for easy cleaning.
4. Foot pad control for filling action is available.
5. Photocell sensors.
6. Made in Taiwan.

Options:
1. Agitator with a variable speed AC motor for mixing the liquid.
2. Liquid feeding pump with a stand.

Application:
This machine is designed to handle water-thin to very viscid fluids.Features
1. Single Head Semi-Auto Filling Machine (with Piston Pump) Volume
range 100ml ~ 1000ml.

2. MACHINE SPECIFICATIONS :
1). Filling Station :
- One (1) set of stainless steel # 304 filling nozzle.
- One (1) set piston pump.
- One (1) set of filling nozzle support.
- Filling pump driven by one of servo motor.

2). 30 Liter stainless steel SUS 304 liquid tank with a level sensor.
- Filling speed : 0 -6 bottle/minute

3). Other Technical Data :
- PLC control system with touch screen.
- 20 job set-up can be stored in memory for easy recall.
- Filling volume can be controlled by touch screen.
- Machine construction covered by stainless steel # 304.
- Performs filling one container at one time.
- Auto / manual, on / off switch, emergency stop button,
filling time setting knob.
- Foot pad control for filling action is available.
- Power source : 220V, 50/60Hz, Single Phase
3. Made in Taiwan.

Application:
This machine is designed to handle water-thin to very viscid fluids. No change parts are needed and fill volume is changed by control panel.

Features:
1. Sanitary spiral filling pump performs filling iscous and general products.
2. Stainless steel frame construction to meet GMP requirement.
3. Spiral filling pump is driven by an individual motor for high accuracy of liquid filling.
4. Made in Taiwan.

Specifications:
Filling Speed: 2-10 Bottles per Minute

Application:
Genipack cup filling, sealing and packaging machine which is used in cup water, caramel, juice, pudding, jelly, milk and solid products.

Features:
Automatic placed cup >> Rinsing >> Positioning >> Filling >> Film cleaning >> Date stamping >> 2 Stages sealing >> Cutting >> Aligning and output in a line.

1. Automatic cup falling system.
2. Automatic liquid quantitative filling.
3. Automatic adjusting the sealing film position.
4. Automatic date stamping.
5. 2-sectional automatic hot sealing.
6. Automatic foil cutting.
7. Automatic sealing temperature controlling.
8. Automatic finished product pushing-out.
9. Automatic foil set up & correction.
10. Automatic controlling of material liquid level input.
11. Stainless steel construction.
12. Made in Taiwan.

Features:
The filling machine consists of:
1. 1 bag loader
2. 1 printing rotary table
3. 1 product tank
4. 1 filling pump
5. 1 filling valve
6. 1 vibrating cap supplier
7. 1 screwing head
8. 1 conveyer exit bags

Operations -
In the standard version the filling machine can execute the following functions:
1. Automatic loading of pouches onto step by step rotary table.
2. Printing of the filling or the best before date on the pouch.
3. Filling of the pouch through a volumetric dosing pump according to the following cycle:
a. Emptying the pouch of air by the means of vacuum.
b. Filling the product according to the bag capacity.
c. Blowing in the pouch filtered air or gas (nitrogen).
4. Corking of the pouch with PE or PP caps.
5. Discharging of the pouch on a conveyor belt .

Special Configurations -
1. Ultra clean
2. Application of a membrane onto the spout
3. Remote maintenance via Modem
4. Possibility to fill up to 1500 ml pouches

Features:
The filling machine consists of:
1. 1 bag loader
2. 1 printing rotary table
3. 1 product tank
4. 2 filling pumps
5. 2 filling valves
6. 1 vibrating cap supplier
7. 2 screwing heads
8. 1 conveyer exit bags

Technical Information:
1. Packaging : From 70 ml to 500 ml
2. Speed: Max 4800 pcs/hour
3. Filling tolerance : 1% of the pouch volume
4. Power consumption : 2000 W
5. Electrical supply : 380 V Three Phase/50 Hz. With separate neutral and ground conductors
6. Pneumatic supply : Compressed air from 6 to 7 bar (atm.)
7. Compressed air consumption : Max 800NI/min
8. Reservoir capacity : 18 litre
9. Filling temperature: from -10 to 90°C Max
10. Product feed : By means of a reservoir with automatic control level and dosing pump
11. Pouch loading : By means automatic supply
12. Cap supply : PE/PP cap with tamper evident
13. Pouch output : In rows on conveyor belt
14. Overall dimensions : Width 3200 mm x Length 3100 mm x Height 2400 mm
15. Dosing regulation : Manual
16. Cycle and function controls : By means of a PLC system, optical sensor and proximity switches
17. Error diagnostics : By means of a diagnostic unit with a touch-screen display

Application:
This machine is designed for cleaning bottle by air or water.

Features:
1. Machine construction made by stainless steel sus#304.
2. Bottle turn-over transfer device.
3. Bottle sensor and indexing unit controlled by air cylinders.
4. Bottle clamper and rotary air cylinder to turn bottles 180 degree.
5. Stainless steel sus#304 conveyor frame.
6. PLC control system.
7. Digital LCD touch screen display and setting.
8. The height of bottle holding assembly can be adjusted.
9. Photocell sensors.
10. Made in Taiwan.

Features:
1. Mitsubishi PLC combined with Proface human / machine interface LCD touch screen controller.
2. Japan made 5-phase stepping motor and driver.
3. Stainless steel frame construction is standard.
4. Labeling speed is automatically synchronized with conveyor speed to ensure quality labeling.
5. 50 Job Memory for easy recall.
6. Conveyor driven by variable speed AC motor.
7. Gearbox
8. Simple adjustments with coupled movement design of two labeling heads with easy access.
9. Powered wipe-down rollers.
10. Made in Taiwan.

Options:
1. Hot foil printer for date-coding.
2. " Push & press " optional attachment is used to ensure smooth labeling without wrinkles or bubbles.
3. Tapered products can take advantage of the " labeling heads angle adjustment " up to 15 degree for conforming to the product shape.
4. Product separating screw for high speed labeling.
5. Transparent label sensor.
6. Servo motor for high speed labeling.

Application:
Semi-auto wrap-around labeler is designed for partial / fully wrap-around labeling on round containers. Available to apply one or two labels at a time on the bottle.

Features:
1. Machine meets current GMP standards.
2. Japan PLC combine with Proface human / machine interface LCD touch screen controller.
3. Japan precision 5-pase stepper motor driver.
4. Stainless steel frame contruction is standard.
5. When the hot foil printer ribbon runs out, this labeler will stop and provide an " error" message.
6. Made in Taiwan.

Options:
1. Hot foil printer for date-coding.
2. Transparent label sensor.

Application:
The machine is designed for wrap-around labeling on cylindrical bottles and containers. It can be incorporated with a line or operated individually.

Features:
1. Machine meets current GMP standards.
2. Japan PLC combine with Proface human / machine interface LCD touch screen control.
3. Japan precision 5-phase stepping motor and driver.
4. Stainless steel frame construction is standard.
5. Labeling speed is automatically synchronized with conveyor speed to ensure quality labeling.
6. When the hot foil printer ribbon run out, thie labeler will stop and provide an " error " message.
7. Made in Taiwan.

Options:
1. Hot foil printer for date-coding.
2. Product feeding turn table ( diameter 650 / 1000 mm.)
3. Product separating screw for high speed labeling.
4. Transparent label sensor.

Application:
Positioning wrap-around labeler is designed for partial / fully wrap-around labeling on round containers. Available for positioning labeling for round bottles with a handle. Available to apply one or two labels at a time on the bottle.

Features:
1. Machine meets current GMP standards.
2. Japan PLC combine with Proface human / machine interface LCD touch screen controller.
3. Japan precision 5-phase stepping motor and driver.
4. Stainless steel frame contruction is standard.
5. Labeling speed is automatically synchronized with conveyor speed to ensure quality labeling.
6. When the hot foil printer ribbon runs out, this labeler will stop and provide on " error" message.
7. Made in Taiwan.

Options:
1. Hot foil printer for date-coding.
2. Product feeding turn table ( diameter 650 / 1000 mm)
3. Transparent label sensor.

Application:
Semi-auto tamp labeler is designed for top labeling on small irregular shap items.

Features:
1. Japan PLC combined with Proface human / machine interface touch screen controller.
2. Japan precision 5-phase stepper motor and driver.
3. Stainless steel frame construction is standard.
4. Labeling head is adjustable for left-right, high-low positions.
5. Air consumption : 2.3 cfm at 50 psi ( 80,000 cm2/min.)
6. Made in Taiwan.

Options:
1. Hot foil printer for date-coding.
2. Transparent label sensor.

Application:
Horizontal wrap-around labeler is designed for non-standing cylindrical containers or products that are not vertically stable including ampoules, vials, crayons, tube, lip balm containers, small batteries etc.

Features:
1. Machine meets current GMP standards.
2. PLC combine with Proface human / machine interface touch screen controller.
3. Japan precision 5-phase stepping motor and driver.
4. Stainless steel frame constructin is standard.
5. Labeling speed is automatically synchronized with conveyor speed ensure quality labeling.
6. 50 job set-up can be stored in memory for easy recall.
7. When the hot printer ribbon runs out, this labeler will stop and provide and " error" message.
8. Labeling speed : 150 - 250 containers / items with hot foil printer. Labeling speed varies based upon product and label size. Actual speed is determined by product testing.
9. Made in Taiwan.

Options:
1. Hot foil printer for date coding.
2. Transparent label sensor.
3. Custom loading case to be designed for each product size.

Application:
This machine is designed for top labeling on the flat products. It can be incorporated with a production line or operated individually.

Features:
1. Machine meets current GMP standards.
2. Japan PLC combine with Proface human / machine interface LCD touch screen controller.
3. Japan precision 5-phase stepper motor and driver.
4. Stainless steel frame construction is standard.
5. Labeling speed is automatically synchronized with conveyor speed to ensure quality labeling.
6. Powered wipe-down rollers.
7. When the hot foil printer ribbon runs out, this labeler will stop and provide an " error " message.
8. Made in Taiwan.

Options:
1. Hot foil printer for date-coding.
2. Transparent label sensor.

Application:
Top & bottom labeler is designed for top and bottom labeling on flat products. It can be incorporated with a production line or operated individually.

Features:
1. Machine meets current GMP standards.
2. Japan PLC combine with Proface human / machine interface LCD touch screen controller.
3. Japan precision 5-phase stepping motor and driver.
4. Stainless steel frame construction is standard.
5. Labeling speed is automatically synchronized with conveyor speed to ensure quality labeling.
6. 50 job set-up can be stored in memory for easy recall.
7. Powered wrip-down rollers.
8. When the hot foil printer ribbon run out, this labeler will stop and provide an " error " message.
9. Made in Taiwan.

Options:
1. Hot foil printer for date-coding.
2. Transparent label sensor.
3. Auto feeder for coffee, tea bags or small cartons.

Application for non-metal material glass containers or plastic bottles, such as ABS, HDPE, LDPE, PET, PP, PS, PVC etc. Especially applicable for foods, soft drinks, beverage, pharmaceutical and chemical industries.

Features:
1. Sealing process is fast and efficient. Even there is little moisture, greasy dirt or powder dirt on the opening of the bottle, it also can seal the opening effectively.
2. It is safe in use. Equipment is loaded with the protection settings for over electric flow, over electric pressure, overload output. Frequency falls in 25-50 KHz and is harmless to human bodies.
3. Simple and easy to use. All functions are clearly labeled on the display board, and it is handy to operate.
4. Modular component design minimizes the maintenance requirements.
5. Easy adjustment by simple button setup or different size of product.
6. The IGBT/MOS-FET module provides high efficiency, lower power consumption and long service life.
7. Suitable outer diameter of the plastic screw cap : 20mm ~ 120 mm.
8. Height of sealing coil is adjustable, flexible for most of bottle height.
9. Made in Taiwan.

Specifications:
Compactly constructed and effective sealing performance. This machine is designed for low quantity production and laboratory application.

Power Output : 500 Watts
Cap Diameter : 20-120 mm
Generator Type : IGBT
Power source : 110V or 220V, 50/60Hz, 1 Phase

Application for non-metal material glass containers or plastic bottles, such as ABS, HDPE, LDPE, PET, PP, PS, PVC etc. Especially applicable for foods, soft drinks, beverage, pharmaceutical and chemical industries.

Features:
1. Sealing process is fast and efficient. Even there is little moisture, greasy dirt or powder dirt on the opening of the bottle, it also can seal the opening effectively.
2. Aluminum foil automatic detecting facility will send out a warning automatically whenever it detects that there is no aluminum foil in the bottle cap to prevent the unsealed products flowing out the production line.
3. It is safe in use. Equipment is loaded with the protection settings for over electric flow, over electric pressure, overload output. Frequency falls in 25-50 KHz and is harmless to human bodies.
4. Simple and easy to use. All functions are clearly labeled on the display board, and it is handy to operate.
5. Modular component design minimizes the maintenance requirements.
6. Easy adjustment by simple button setup or different size of product.
7. The IGBT/MOS-FET module provides high efficiency, lower power consumption and long service life.
8. Suitable outer diameter of the plastic screw cap : 20mm ~ 120 mm.
9. Height of sealing coil is adjustable, flexible for most of bottle height.
10. Made in Taiwan.

Specifications:
The power supply and sealing coil is mounted to a portable cart for easy mobility from line to line.
Power Output : 2000 Watts
Cap Diameter : A: 20-60 mm ; B: 20-120 mm
Generator Type : IGBT/MOS-FET
Power source : 220V, 50/60Hz, 1 Phase

Application for non-metal material glass containers or plastic bottles, such as ABS, HDPE, LDPE, PET, PP, PS, PVC etc. Especially applicable for foods, soft drinks, beverage, pharmaceutical and chemical industries.

Features:
1. Sealing process is fast and efficient. Even there is little moisture, greasy dirt or powder dirt on the opening of the bottle, it also can seal the opening effectively.
2. Aluminum foil automatic detecting facility will send out a warning automatically whenever it detects that there is no aluminum foil in the bottle cap to prevent the unsealed products flowing out the production line.
3. It is safe in use. Equipment is loaded with the protection settings for over electric flow, over electric pressure, overload output. Frequency falls in 25-50 KHz and is harmless to human bodies.
4. Simple and easy to use. All functions are clearly labeled on the display board, and it is handy to operate.
5. Modular component design minimizes the maintenance requirements.
6. Easy adjustment by simple button setup or different size of product.
7. The IGBT/MOS-FET module provides high efficiency, lower power consumption and long service life.
8. Suitable outer diameter of the plastic screw cap : 20mm ~ 120 mm.
9. Height of sealing coil is adjustable, flexible for most of bottle height.
10. Made in Taiwan.

Application:
Suitable for non-metal containers, such as glass, or plastic bottles ABS, HDPE, LDPE, PET, PP, PS, PVC etc.
1. Suitable for screw caps, tamper-proof caps, etc.
2. Suitable for cap outside diameter range 20mm~38 mm.
3. Special customized cap size acceptable.

Features:
1. Capping or capping plus aluminum foil sealing are allowed.
2. Capping speed and torque is adjustable. Power and heating time of foil sealing is adjustable.
3. The capping motor adopts brushless DC motor.
4. Height of machine is adjustable according to bottle height.
5. Made in Taiwan.

Specifications:
Power Output: 1100W
Input Voltage: 220V
Cap Diameter: 20mm~38mm
Generator Type: IGBT
Frequency(KHZ): 125 - 250K/HZ

Application:
This machine is designed to handle plastic screw cap, snap hinge cap and flex band cap for general products.

Features:
1. For different size of cap, capping head is changeable.
2. Adjustable capping torque, no damage cap surface.
3. Capping head height is adjustable through a screw hand wheel.
4. Foot pad controller.
5. One air compressor (1 HP) is required (prepared by buyer).
6. Made in Taiwan.

Options:
1. Capping head for the 2nd different size of cap.

Application:
This machine is designed for plastic bottles / containers leak testing. Special application for plastic bottles makers, soft drinks, motor oil, lubricants, detergents and chemical industries to ensure bottle quality before liquid filling.

Features:
1. Stainless steel frame construction.
2. No change parts are required for different bottle sizes.
3. Digital settings with easy access to make adjustment for testing time.
4. PLC control systems.
5. Made in Taiwan.

Specifications:
Examine Speed: 6 - 10 Bottles per Minute
Bottle Size Range: 100 cc - 4 Liter
Power Source: 220V, 50/60Hz, 1 Phase
Air Pressure: 64 - 85 psi
Conveyor Speed: 0 - 15 Meter per Minute

Application:
This machine is designed for plastic bottles / containers leak testing. Special application for plastic bottles makers, soft drinks, motor oil, lubricants, detergents and chemical industries to ensure bottle quality before liquid filling.

Features:
1. Stainless steel frame construction.
2. No change parts are required for different bottle sizes.
3. Digital settings with easy access to make adjustment for testing time.
4. PLC control systems.
5. Made in Taiwan.

Specifications:
Examine Speed: 12 - 20 Bottles per Minute
Bottle Size Range: 100 cc - 4 Liter
Power Source: 220V, 50/60Hz, 1 Phase
Air Pressure: 64 - 85 psi
Conveyor Speed: 0 - 15 Meter per Minute

Application:
1. Water, milk, juice, medicine, edible oil, ketchup, seasonings, BBQ sauce etc.,
2. Depending on the specification, it is suitable for cold filling, hot filling, oil-resistant, chemical resistant.
3. Depending on the specification, it is suitable for PE, PP, PET, PS, PVC bottles by heat seal.

Features:
1. It consists of two layers of sealing materials - inner paper and induction sealing aluminum foil.
2. Induction sealing aluminum foil comes with pulling tab which is in contact with inner paper. It can help to prevent aluminum foil stick to inner paper.
3. It is easy to process. Excellent sealing effect and it is easy to peel off.
4. Made in Taiwan.

Specifications:
1. Inner paper: It is paper laminated with plastic film, and then treated with anti-sticking agent.
2. Induction sealing aluminum foil: It consists of multi-layers of plastic film and aluminum foil.
3. Inner paper and induction sealing aluminum foil are inserted into the cap together, with aluminum foil faces out.

High-frequency heating technology is widely used in various applications of metal materials, e.g., soldering, brazing, hard brazing, anneal, quenching, tempering, hot shaping, metal heating and local heating of work pieces, etc.

♦ Surface hardening treatment
♦ Forging heating
♦ Anneal, quenching and tempering
♦ Various heating applications

Features:
Induced heating has the advantages of highly efficiency, saving save time, reducing surface oxidation by fast through heating, saving material, eliminating stress, providing high sustainability, simple installation, capable of preventing the surface of work piece from decarburization, improving the quality of forge piece, extending the longevity of molds, stable performance, low and assured maintenance cost, making it a very efficient heating tool in heat treatment. Made in Taiwan.

♦ Full solid state power generator combined with modular construction feature maximum operation convenience.

♦ Available to employ IGBT or MOS FET power unit. Compact construction, high performance and low power consumption. Suitable for metal heating and temperature raising.

Specifications:
Max. Out Power : 12KW / 30KW
Max. Input Power: 13KV / 33KV
Frequency: 30-80KHZ / 100-300KHZ
Dimensions: 300 x 200 x 320mm
Net Weight:15kg

Application:
This machine is designed to handle plastic screw cap, snap hinge cap and flex band cap for flat, oval and square shape containers.

Features:
1. Machine main construction by stainless steel sus#304.
2. Japan PLC control system combined with Proface touch screen.
3. Fast change over device and easy machine clearing.
4. One capping head ( for one size only ) with variable speed AC motor.
5. Auto cap feeder with caps vibrating bowl and cap chute for one size only.
6. Cap chute with photo sensor, machine will stop automoatically while no cap.
7. Wrap around belts assembly for holding the containers.
8. One air compressor ( 1 HP) is required ( to be preapred by buyer).
9. Made in Taiwan.

Options:
1. Vibratory bowl and cap chute for the 2nd different size of cap.
2. Cap hopper with elevotor conveyor for supplying caps into cap sorter.
3. Capping head for the 2nd different size of cap.

Application:
This machine is designed to handle plastic screw cap, snap hinge cap, click-loc cap and flex band cap for round, square, and irregular shape containers.

Features:
1. Machine main construction by stainless steel sus#304.
2. Japan PLC control system combined with Proface touch screen.
3. Fast change over device and easy machine clearing.
4. Capping head ( for one size only ) with variable speed AC motor.
5. Auto cap feeder with caps vibrating bowl and cap chute for one size only.
6. Cap chute with photo sensor, machine will stop automatically while no cap.
7. One air compressor ( 1 HP) is required ( to be prepared by buyer ).
8. Made in Taiwan.

Options:
1. Bottle star-wheel for the 2nd different size of bottle size.
2. Vibratory bowl and cap chute for the 2nd of screw cap.
3. Cap hopper with elevator conveyor for supplying caps into cap sorter.
4. Capping head for the 2nd different size of cap.